Mon to Sat:9:00 to 6:30
-
-
-
Floor 6, D Building,Shanghe Industrial Park,Nanchang Road,Sanwei Community,Hangcheng Street, Bao’an District, Shenzhen, China.
News
PWM Solar Charger Controller 12V/ 24V 10A 20A 30A
10A 20A 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with Dual USB Port Auto Parameter LCD Display and Timer Setting ON/Off Hours
PRODUCT FEATURES
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully3-stage charge management.
4 .Bvoccnshovelroad protecton open-circuit protection,reverse
5.Dual USB output,the maximum current of 2.5A, to support Apple'smobile phone charging.6.Dual mosfet Reverse current protection,low heat production
SAFETYINSTRUCTIONS
1.Make sure your battery has enough voltage for the controller torecognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batterieS:OPEN,AGM,GELit is not suited for nickel melal hvdride,lithium ions or other batteries
4.The charge regulator is only suitable for regulating solar modules.Never connect another charging source to the charge regulator.
SAFETYINSTRUCTIONS
1.Make sure your battery has enough voltage for the controller torecognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batterieS:OPEN,AGM,GELit is not suited for nickel melal hvdride,lithium ions or other batteries
4.The charge regulator is only suitable for regulating solar modules.Never connect another charging source to the charge regulator.
System connection
1. Connect the positive and negative terminals of the battery to the controller according to the figure, and the controller will automatically detect the battery voltage.
2. Connect the positive and negative poles of the load to the controller according to the diagram, and be careful not to reverse connection.
3. Connect the solar panel to the controller as shown in the figure.
Panel status indicator and setting
Menu key: Switch to the parameter screen, or hold down the function key to enter or exit parameter setting
Flip up: On the parameter setting screen, tap once to add one step to the parameter
Flip down: On the parameter setting screen, tap once to lower the parameter one step down
Browsing interface: Press the menu key to browse various aspects and parameters
Set parameters: On the screen 2-5, hold down 55 to scroll up to enter manual setting. At this time, the numbers will blink. Press up or down to adjust parameter values
Safety instructions:
1: How to install it? 1.Battery 2.Solar panels 3.load
2: Please install the charger controller on a flat, well-ventilated place (indoor)
3: The LCD screen has an error of 0.2V to 0.3V, but this is normal.
4: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries.
5: This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power.
Rated Voltage: 12V/24V
Charge Current: 30A
Discharge Current: 10A
Max. PV Voltage: 50V
Max Solar input: <50V
Float Charge: 13.7V (defaul,adjustable)
Discharge Stop: 10.7V (defaul,adjustable)
Discharge Reconnect: 12.6V (defaul,adjustable)
Operating temperature: -35~+60℃
USB output: 5V/2.5A
Package List:
1 x 30A Solar Charge Controller
1X English User Manual
Related News
20
Dec 24We would love to share a similar experience
Introduction: With the rise of renewable energy systems and the increasing demand for efficient energy storage, LiFePO4 (
17
Dec 24We would love to share a similar experience
The innovative 50W solar lighting kits are set to enhance energy access for remote and off-grid areas, offering a sustain
