Modified Sine Wave Inverter 300W Production 5680pcs

DC to AC Power Inverter , modified sine wave inverter ,factory in shenzhen ODM Solar 

The 100W/150W/300W/500W is capable of continuously powering most 220-volt AC products that use 80W/120W/240W/400W or less. Its AC output waveform, called "modified-sine wave",is de signed to function similarly to the sine wave shape of utility power.
Most AC products rated for 80W/120W/240W/400W or less will operate normally with the 100W/150W/300W/500w.
The power or "wattage" rating of AC products is the average power they use. When many AC Products are first switched on, the initially consume more power than than their power rating. Tvs, monitors, and electric motors are examples of products that have high“surge” requirements at start up. Although the 100W/150W/300W/500W can supply momentary surge power as high as 200W/300W/600W. 1000W, occasionally some products rated Iess than 80W/120W/240W/400W may exceed its surge capabilities and trigger its safaty overload shutdown feature.
Indicators Controls and Connectors
▘An AC outlet is provided on onend of the Inverter. A220-volt AC product with a continuous power consumption of 80W/120W/240W/400W or Iess, may be plugged in.
▘The inverter receives its operating power through is DC Plug that fits standard vehicle cigarette lighter sockets and 12-volt power outlets.
 
Generally, most AC products operate the inverter just as they would with household AC power. Below is information concerning two possible exceptions.
Buzzing Sound in Audio Systems,
Some inexpensive stereo systems and "boom boxes" have inadequate internal power supply filtering and "buzz" slightly when powered by the inverter, Generally, the only solution is an audio Television Interference.
The Inverter is shielded to minimize interference with TV signals, However, with weak TV signals interference maybe visible in the form of lines scrolling across the screen. The following should minimize or eliminate the problem.
▘Use an extension cord to increase the distance between the Inverter and the TV antenna and cables.
▘Adiust the orientation of the lnverter, antenna and cables.
▘Maximize TV signal strength by using a better antenna and use shielded antenna cable where possible.
▘Try a different TV different models of televisions vary considerably in their susceptibility to inter ference.
 
▘The ON/0FF switch enables output AC power at the AC outlet when switched ON.
▘The green POWER light indicates AC power is present at the AC outlet and the Inverteris operating normally.
▘The red PAULT light indicates inverter shutdown caused by low or high battery voltage, overload or excessive temperature.
▘The ON/OFF switch enables output AC power at the AC outlet when switched ON.
▘The green POWER light indicates AC power is present at the AC outlet and the Inverteris operating normally.
▘The red FAULT light indicates inverter shutdown caused by low or high battery voltage, overload or excessive temperature.
 
Inverter Operation
▘Plug the Inverter DC Plug into a vehicle' s cigarette lighter or 12-volt outlet.
▘Turn the AC product you wish to operate into the Acoutlet and switch it on. As the battery charge is used up, battery voltage begins to fall. When the Inverter senses the voltage at its DC input has dropped to 10.7 volts, an audio warning is provided. When input voltage drips to 10.0 volts, the Inverter will automatically shut down to prevent battery damage. The red FAULT light illuminates.
▘If the Inverter exceeds a safe operation temperature, due to insufficient ventilation or a high temperature environment, is will automatically shut down. Then red FAULT light will turn on.
CAUTION! Although the Inverter icorporates protection against over-voltage, it may still be damaged if the input voltage exceeds 16 volts.
▘In the event of an overload, low battery voltage or overheating, the inverter will automatically shut down. (See Section 4.)
 
Interference with Electroniscs Equipment
Generally, most AC products operate the inverter just as they would with household AC power. Below is information concerning two possible exceptions.
Buzzing Sound in Audio Systems,
Some inexpensive stereo systems and "boom boxes" have inadequate internal power supply filtering and "buzz" slightly when powered by the inverter, Generally, the only solution is an audio Television Interference.
The Inverter is shielded to minimize interference with TV signals, However, with weak TV signals interference maybe visible in the form of lines scrolling across the screen. The following should minimize or eliminate the problem.
▘Use an extension cord to increase the distance between the Inverter and the TV antenna and cables.
▘Adiust the orientation of the lnverter, antenna and cables.
▘Maximize TV signal strength by using a better antenna and use shielded antenna cable where possible.
▘Try a different TV different models of televisions vary considerably in their susceptibility to inter ference.


Battery Operating Time
When using the Inverter, operating time will vary depending on the charge level of the battery, its capacity and the power level drawn by the particular AC load, With a typical vehicle battery and a 50-wattload (such as a portable stereo/CD player), an operating time of 5-6 hours or When using a vehicle battery as a power source, it is strongly recommended to start the vehicle every hour or two to recharge the battery before its capacity drops too low. The inverter can operate while the engine is running, but the nomal voltage drop that occurs during starting may trigger the Inverters low voltage shutdowr feature.
Because the Inverter draws less than 0.15 amps with the 0N/0FF switch in the 0N position and With no AC products connected, it has minimal impact on battery operating times.

Thanks for  buying the series power source converter .  150w 300w 500w 1000w 1500w 2000w 3000w 220v or 110v